To Next PageTo Next PageWhat causes Low temperature water Probe failure in HANLI SCH-2000?
If your HANLI Chiller is showing a Low temperature water Probe failure, it could be due to a short circuit or disconnection in the low temperature water probe, so check for loose probe wires. Alternatively, the low temperature water probe might be damaged, requiring a replacement probe.
What does Water level switch alarm mean on HANLI SCH-2000 Chiller?
If your HANLI Chiller displays a Water level switch alarm, it means the water tank level is insufficient. Refill the tank to the level standard zone.
Details the acceptable ambient temperature range, relative humidity, and maximum altitude for chiller operation.
Defines the approved cooling media, permitted additives like glycol/ethanol, and prohibited substances.
Covers unpacking, horizontal placement, fixing methods, and environmental constraints for chiller installation.
Details the process of connecting water pipes between the chiller and the laser, including flow direction and pressure.
Provides instructions on safe electrical wiring, including power cord selection and grounding requirements.
General