User's Manual of Fiber Laser Chiller
Contact with live parts can result in serious personal injury or
death.
Any part of the body and heat resistant articles must be kept
away from this high temperature area, otherwise it will cause
personal injury or property loss.
A) The power supply mode must be selected in accordance with
the relevant contents of the nameplate or the manual;
B) The cable must use standard cable, and the wire diameter
shall be selected according to the standard;
C) Grounding must be installed and the connection must
be reliable, otherwise it will cause the danger of electric
shock or fire.
It must be cut off for 3 minutes before it can work.
When the equipment has reached its service life and needs to
be scrapped, it must be disposed of with industrial garbage.
Please ask professional guidance for scrapping.
Do not use beyond
specification
It is forbidden to use the equipment beyond the specification in
order to avoid major accidents such as equipment damage,
injury, fire and electric shock.
Cannot be used in
an explosive
environment
Do not install in a dangerous place where there is combustible
gas.
Do not run the
device without an
outer cover
There are live parts in the machine. Do not run without an
outer cover
Danger of electric shock.
Do not let the equipment drench or soak, otherwise there
may be short circuit and electric shock hazard.
Warning Be sure to take safety measures, otherwise it may lead to death or serious personal injury.
To Next Page
Loading...
