41
Use ARROW keys to focus on the parameter to be changed (“Change Slope”
or “Molar Weight”).
Focus on
Change Slope
item.
Use ARROW keys in order to select the desired combination.
If None/-59.16 is selected the slope of the probe can be changed by pressing
Modify key.
Press Modify.
Use ARROW keys to change the slope.
Press Accept to confirm or ESC to exit.
Focus on
Molar Weight
.
Press Modify in order to change molar weight.
Use ARROW keys to change the value. Press Accept to confirm or ESC to exit.
To Next Page
Loading...
