43
This feature allows the user to log pH, Rel mV or ISE measurements. All logged
data can be transferred to a PC through the USB port.
The logging space includes 200, 300 or 400 records of Log on demand,
acoording to the model, and 600 records of Log interval (lot logging). The log
interval is organized in lots. A maximum of 100 lots are accepted. One lot can
occupy all the memory space available.
LOGGING THE CURRENT DATA
To store the current reading into memory, press LOG while in measurement mode.
The instrument will display for few seconds the record number and the amount
of the free log space.
If the LOG space is full, the “Log space is full” message will be displayed for
few seconds when Log key is pressed. Enter View Logged Data Mode and delete
records in order to free log space.
LOT LOGGING
Select the desired interval in SETUP as a timed interval or AutoEnd waits for
a stable value before logging.
Press the StartLog function key in order to start Log interval.
Press the StopLog function key in order to stop logging and close current lot.
LOGGINGLOGGING
LOGGINGLOGGING
LOGGING
To Next Page
Loading...
Need help?
General
