Hanna Instruments HI 96107 - User Manual

pHep
®
HI 96107
Pocket-Sized
pH Meter
www.hannainst.com
SPECIFICATIONS
Range 0.0 to 14.0 pH
Resolution 0.1 pH
Accuracy (@20°C) ±0.1 pH
Calibration manual, 1 point
Environment RH 95% max;
0 to 50°C (32 to 122°F)
Batteries 3 x 1.5V alkaline
Life approx. 150 hours of use
Dimensions 150x30x21 mm
(5.9x1.2x0.8")
Weight 70 g (2.5 oz.)
ACCESSORIES
HI 70007P pH 7.01 solution (20 ml
sachet, 25 pcs)
HI 7007L pH 7.01 solution (500 ml)
HI 7007M pH 7.01 solution (230 ml)
HI 70300L Storage solution (500 ml)
HI 70300M Storage solution (230 ml)
Dear Customer,
Thank you for choosing a Hanna product.
If you need additional technical informa-
tion, do not hesitate to e-mail us at
tech@hannainst.com.
This instrument is in compliance with the
directives.
WARRANTY
This meter is guaranteed for six months against de-
fects in workmanship and materials when used for
its intended purpose and maintained according to in-
structions. This warranty is limited to repair or
replacement free of charge. Damages due to acci-
dent, misuse, tampering or lack of prescribed
maintenance are not covered. If service is required,
contact the dealer from whom you purchased the in-
strument. If under warranty, report the model number,
date of purchase, serial number and the nature of the
failure. If the repair is not covered by the warranty,
you will be notified of the charges incurred. If the
instrument is to be returned to Hanna Instruments,
first obtain a Returned Goods Authorization Number
from the Customer Service department and then send
it with shipment costs prepaid. When shipping any
instrument, make sure it is properly packaged for com-
plete protection.
IST96107 12/04

Hanna Instruments HI 96107 Specifications

General

Model	HI 96107
pH Resolution	0.01 pH
ORP Resolution	1 mV
ORP Accuracy	±1 mV
IP Rating	IP67
Type	Portable
Temperature Range	-5.0 to 105.0°C (23.0 to 221.0°F)
Temperature Resolution	0.1°C / 0.1°F
Calibration	Automatic
Auto Shut-Off	After 8 minutes of non-use
Environment	0 to 50°C (32 to 122°F)

Summary

Product Specifications

Available Accessories

List of optional accessories for the pH meter, including calibration and storage solutions.

Product Warranty Information

Operating the pH Meter

Electrode Handling and Care

Instructions for handling the protective cap, electrode crystals, and proper rinsing after use.

Powering On and Measurement Immersion

Steps for turning the meter on and immersing the electrode into the solution for measurement.

Proper Storage Procedure

Guidance on storing the pH meter with solution in the protective cap after use.

pH Meter Calibration

Calibration Procedure Steps

Detailed steps for calibrating the pH meter using a buffer solution and adjustment trimmer.

Battery Replacement Guide

Battery Replacement Conditions

When to replace batteries, safety precautions, and battery type specifications.