Need help?Do you have a question about the Hanna Instruments HI 96811 and is the answer not in the manual?
General| Model | HI 96811 |
|---|---|
| Category | Measuring Instruments |
| Type | Digital Refractometer |
| Resolution | 0.1 % Brix |
| Accuracy | ±0.2 % Brix |
| Light Source | Yellow LED |
| Detector | Silicon Photocell |
| Measurement Time | Approximately 1.5 seconds |
| Enclosure Rating | IP65 |
| Weight | 420 g (14.8 oz) |
| Measurement Range | 0 to 85 % Brix |
| Temperature Compensation | Automatic Temperature Compensation (ATC) between 10 and 40 °C (50 and 104 °F) |
| Minimum Sample Volume | 100 μL (cover prism totally) |
| Auto-off | After 3 minutes of non-use |
| Battery Life | 5000 readings |
| Operating Temperature | 0 to 50 °C |
| Dimensions | 192 x 102 x 67 mm (7.6 x 4.0 x 2.6 inches) |
| Battery Type | 1.5V AAA (2) |
General specifications applicable to all models, including measurement time, sample volume, light source, and dimensions.
Powering on the instrument and observing initial test screens and battery life display.
Filling the sample well with distilled or deionized water to cover the prism.
Pressing the ZERO key to calibrate the instrument with the water standard.
Gently absorbing excess water from the prism surface after calibration.
Pressing the READ key to obtain the measurement result in the selected unit.
To Next Page