8
DISPLAY ELEMENTSDISPLAY ELEMENTS
DISPLAY ELEMENTSDISPLAY ELEMENTS
DISPLAY ELEMENTS
1. SETUP: Factory Calibration Tag
2. Measurement in Progress Tag
3. Battery (blinks when low battery condition detected)
4. CAL: Calibration Tag
5. Automatic Temperature Compensation
(blinks when temperature exceeds 10-40°C / 50-104°F range)
6 Primary Display (displays measurement and error messages)
7. Temperature Units
8. Secondary Display (displays temperature measurements; when blinking,
temperature has exceeded operation range: 0-80°C / 32-176°F)
9. Range indicator (HI 96813 and HI 96814 only)
To Next Page
Loading...
