2
All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the
copyright owner, Hanna Instruments Inc., Woonsocket, Rhode Island, 02895, USA.
Remove the instrument from the packing materials and examine carefully to ensure no
damage has occurred during shipping. If any damage has occurred, notify your Dealer
or closest Hanna Customer Service Center.
Each instrument is supplied with:
• 9 V battery
• Instruction manual
Note:Save all packing material until you are sure that the instrument functions
correctly. A defective instrument must be returned in its original packing.
Dear Customer,
Thank you for choosing a Hanna product. This manual will provide you with the necessary
information for the correct use of these instruments. Please read it carefully before using the meters.
If you need additional technical information, do not hesitate to e-mail us at tech@hannainst.com.
These instruments are in compliance with
directives.
TABLE OF CONTENTS
PRELIMINARY EXAMINATION
PRELIMINARY EXAMINATION ............................................................................................. 2
GENERAL DESCRIPTION ..................................................................................................... 3
SPECIFICATIONS .................................................................................................................. 4
PRINCIPLE OF OPERATION ................................................................................................ 5
MEASUREMENT UNITS ........................................................................................................6
FUNCTIONAL DESCRIPTION................................................................................................7
DISPLAY ELEMENTS ............................................................................................................ 8
MEASUREMENT GUIDELINES .............................................................................................. 9
CALIBRATION PROCEDURE ................................................................................................ 9
MEASUREMENT PROCEDURE ...........................................................................................10
TO CHANGE MEASUREMENT UNIT (HI 96813, HI 96814) ..............................................11
TO CHANGE TEMPERATURE UNIT....................................................................................12
TO CHANGE POTENTIAL ALCOHOL CONVERSION FACTOR (HI 96813 only) ................13
MAKING A STANDARD %BRIX SOLUTION ......................................................................13
ERROR MESSAGES ............................................................................................................14
BATTERY REPLACEMENT .................................................................................................15
WARRANTY ........................................................................................................................15
To Next Page
Loading...
Need help?
General
