Hanna Instruments UPW HI 98309 User Manual

UPW
HI 98309
Ultra Pure Water Tester
SPECIFICATIONS
Range 0.000 to 1.999 µS/cm
Resolution 0.001 µS/cm
Accuracy (@20°C/68°F) ±2% f.s.
Typical EMC Deviation ±0.5% f.s.
Environment 0 to 50°C (32 to 122°F);
95% RH non-condensing
Battery Type 4 x 1.5V alkaline
Battery Life approx. 120 hours of use
Dimensions 175 x 41 x 23 mm
(6.9 x 1.6 x 0.8")
Weight 95 g (3.4 oz.)
ACCESSORIES
HI 73309 Spare probe
HI 731326 Calibration screwdriver (20 pcs)
WARRANTY
This meter is guaranteed for one year against defects in
workmanship and materials when used for its intended pur-
pose and maintained according to instructions. Probes are
guaranteed for six months. This warranty is limited to repair
or replacement free of charge. Damages due to accident,
misuse, tampering or lack of prescribed maintenance are
not covered. If service is required, contact the dealer from
whom you purchased the instrument. If under warranty, re-
port the model number, date of purchase, serial number
and the nature of the failure. If the repair is not covered by
the warranty, you will be notified of the charges incurred. If
the instrument is to be returned to Hanna Instruments, first
obtain a Returned Goods Authorization Number from the
Customer Service department and then send it with ship-
ment costs prepaid. When shipping any instrument, make
sure it is properly packaged for complete protection.
The UPW is in compliance with the CE directives.
IST98309 R5 05/05
www.hannainst.com

Hanna Instruments UPW HI 98309 Specifications

General

Brand	Hanna Instruments
Model	UPW HI 98309
Category	Test Equipment
Language	English

Summary

Product Specifications and Accessories

Specifications

Details on range, resolution, accuracy, environment, battery type and life, dimensions, and weight.

Accessories

Lists included accessories such as spare probe and calibration screwdriver.

Warranty Information

Operation and Calibration

Operation

Instructions for using the UPW tester, including rinsing, immersing, and stabilizing the reading.

Calibration

Guidance on factory calibration and recalibration procedures using specific solutions.

Battery and Probe Management

BEPS and Battery Replacement

Information on the Battery Error Preventing System and battery replacement process.

Probe Replacement

Instructions for contacting the dealer or service center for probe replacement.