User’s Manual
OPERATING INSTRUCTIONS
GENERAL INSTRUCTIONS
Press the power button to turn the monitor on or off. The other control buttons are located on the
front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to
your personal preferences.
• The power cord should be connected.
• Connect the Signal cable from the monitor to the VGA card.
• Press the power button to turn on the monitor. The power indicator will light up.
Show OSD Menu / Select Function
Move Icon Down / Decrease Value
Move Icon Up / Increase Value
Back to Last Menu / Auto Adjust
Change Ratio (Wide or Normal)
Display or Change Input Signal
Turn Monitor ON / OFF
Figure.4. Control Panel Buttons
12
To Next Page
Loading...
Need help?
General
