Hanns.G HT225HPB - Operating Instructions; General Operating Instructions

User’s Manual
OPERATING INSTRUCTIONS
GENERAL INSTRUCTIONS
Press the power button to turn the monitor on or off. The other control buttons are located on the
front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to
your personal preferences.
• The power cord should be connected.
• Connect the Signal cable from the monitor to the VGA card.
• Press the power button to turn on the monitor. The power indicator will light up.
Menu / Return
▼◄ [－]
Picture Mode adjustment button, press 3 seconds
activates Automatic Adjustment.
▲ ► [＋]
Audio Menu adjustment button, press 3 seconds
activates Mute/Unmute mode.
Input Select / Enter
Selects between VGA, HDMI, DISPLAYPORT
or Auto.
Power Button
Figure.4. Control Panel Buttons
11