EasyManuals Logo
Home>Hanns.G>Monitor>HW173ABB

Hanns.G HW173ABB User Manual

Hanns.G HW173ABB
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
User’s Manual
Before operating the monitor, please read this manual thoroughly. This manual should be
retained for future reference.
FCC Class B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy, and if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The device complies with Parts 15 of the FCC Rule. Operation is subject to the following
two conditions(1) this device may not cause harmful interferenceand (2) this device
must accept any interference received, including interference that may cause undesired
operations.
CANADA
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulation.
This device complies with requirement of EMC directive 89/336/EEC with regard to
Electromagnetic Compatibility, and 73/23/EEC and 93/68/EEC with regard to Low Voltage
directive.
Socket-outlet shall be near the equipment and shall be accessible.
2

Other manuals for Hanns.G HW173ABB

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hanns.G HW173ABB and is the answer not in the manual?

Hanns.G HW173ABB Specifications

General IconGeneral
Pixel pitch0.255 x 0.255 mm
Aspect ratio16:10
Display diagonal17 \
Display resolution1440 x 900 pixels
Viewing angle, vertical150 °
Contrast ratio (typical)600:1
Display number of colors16.78 million colors
Display brightness (typical)250 cd/m²
AC (power) inYes
DVI-D ports quantity0
Power consumption (standby)1 W
Power consumption (typical)19.6 W
Power requirementsAC
CertificationCE, FCC, BSMI, CB, UL/CUL, NEMKO/GS, CCC, MPRII, MIC, GOST, PSB, VCCI, C-Tick
Product colorBlack
Market positioning-
LED indicatorsStand-by
Tilt angle range0 - 20 °
Panel mounting interface100 x 100 mm
Sustainability certificatesENERGY STAR
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)10 - 85 %
Weight and Dimensions IconWeight and Dimensions
Depth (without stand)198 mm
Width (without stand)368.3 mm
Height (without stand)401.3 mm
Weight (without stand)3400 g

Related product manuals