OPERATING INSTRUCTIONS
GENERAL INSTRUCTIONS
Press the power button to turn the monitor on or off. The other control buttons are located at
front panel of the monitor (See Figure 4). By c hanging these settings, the picture can be
adjusted to your personal preferences.
The power cord should be connected.
Connect the Signal cable from the monitor to the computer.
Press the power button to turn on the monitor. The LED will turn green.
Figure.4. External Control Button
EXTERNAL CONTROLS:
1. MENU 2. VOL +
3. POWER 4.
VOL -
5. AUTO 6. Power Indicator (LED)
12
3
45
6
To Next Page
Loading...
