FRONT PANEL CONTROL
Power Button:
Press this button to switch the monitor on and off.
Power Indicator (LED):
Blue — Power On mode.
Orange — Power saving mode
MENU / ENTER:
1. Activate the OSD menu or adjust the function settings and confirmation.
2. Exit OSD menu when in volume OSD status.
VOL - / VOL + :
1. Activates the volume control when the OSD is OFF.
2. Navigate through adjustment icons when OSD is ON or adjust a function when
function is activated.
Auto Adjust button:
When OSD menu is in off status, press this button to activate the Auto Adjustment
function.
(The Auto Adjustment function is used to optimized the H-Position, V-Position, Clock and
Phase.)
NOTES:
Do not install the monitor in a location near heat sources such as radiators or air dusts,
or in a place subject to direct sunlight, or excessive dust or mechanical vibration or
shock.
Save the original carton and packing materials, as they will come in handy if you ever
have to ship your monitor.
To ensure problem-free shipping, pack your monitor in the same packing materials
and carton as it was shipped from the factory.
To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains
may be removed with a cloth lightly dampened with a mild detergent solution. Never use
strong solvents such as paint thinners, benzene, or abrasive cleaning products. These
and other harsh cleaning agents will damage the cabinet of the monitor.
To Next Page
Loading...
Need help?
General