Hanover DG3 - 1.5.1 Model variants

DG3 Controller – Installation and Operation
Manual
540846-3 page 12 of 64 25/09/2015
Features
Meaning
Description
Product no.
Product number
Identifies the specific model. In this example, the product
number is DG3 01 0 0 and is explained in section 1.5.1 Model
variants.
Position
-
Indicates where the controller is likely to be fitted on the
vehicle.
Type
-
Basic information provided.
Our order no.
Our order number
Number used for internal use by Hanover.
Your O/N
Your Order
Number
Number used to identify the order for this controller.
Your Part no.
Your Part number
Specific to each controller.
S/N
Serial Number
Specific to each controller.
End User
-
Is generally the ultimate operator of the vehicle.
Builder
-
References the name/customer to which the product is
shipped.
Job reference
-
For the use of builder or end user.
Manufactured
-
Date when the finished controller is available for shipment
after all checks, tests and approvals are complete.
Made in the UK
-
Shows the country of manufacture of the controller.
Exx-yyR-zznnnn
United Nations
Standard Type
Approval (EMark)
number
xx = country code.
yy = regulation number.
zz = regulation revision number.
nnnn = approval certificate number.
Model variants
The DG3 controller has a product number of DG3 AA B C where:
2. AA indicates the build variant
3. B indicates the secondary communications variant
4. C indicates other options