Page EN-21
Operation: Cycle adjustments
For a precise overview, see Table “Cycle ad-
justments” on page EN-15).
Changing the washing water
temperature
Please note that setting the washing water
temperature has an influence on the cycle’s
duration and the appliance’s energy con-
sumption.
After selecting the desired cycle, the LED (2)
for the standard temperature lights up.
• To change the washing water tempera-
ture, repeatedly press the “Temp” but-
ton (13) until the LED for the desired tem-
perature lights up.
If no LED lights up, the appliance uses the
tap water without heating.
Changing spin speed
Please note that the spin speed influences
the appliance’s sound emissions and the re-
sidual moisture of the laundry. The higher the
spin speed, the higher the noise emissions
and the lower the residual moisture.
After selecting the desired cycle, its standard
spin speed will be shown on the display.
• To change the spin speed, repeatedly tap
the “Rpm
” button (12) until the desired
spin speed is shown on the display.
If no LED lights up, the water remains in
the machine at the end of the course of the
cycle, and the laundry is not spun.
Pre-wash/Extra rinse
Please note that these settings affect the cy-
cle’s duration, as well as the water and ener-
gy consumption.
After selecting your preferred cycle, you can
add one or both functions to the cycle:
“Pre-wash”
This option is recommended only for
heavily soiled laundry (see “Adding
detergent/fabric-care products“ on
page EN-18).
“Extra rinse”
• To select an option, repeatedly tap the
“Function” button (10) until the LED for
the desired function(s) lights up.
Operation: Cycle adjustments
(9)(10)(11)(12)(13)
B
mw
ll
Trommelreini
un
ntheti
F
inw
h
W
ll
i
eans
portwäsch
Bab
bekleidun
Express1
chnell 4
E
4
-
Int
n
iv
2
püle
chleuder
Temp
nkti
tart
Paus
Ein
Aus
3
ek. drücken
ür
i
nal
(1) (2) (3) (4) (7) (8)(6)
(5)