Need help?Do you have a question about the Haojue XPRESS and is the answer not in the manual?
General| Cooling System | Air-Cooled |
|---|---|
| Fuel System | Carburetor |
| Transmission | 5-Speed |
| Front Brake | Disc |
| Rear Brake | Drum |
| Front Suspension | Telescopic Fork |
| Ground Clearance | 160 mm |
| Engine Type | Single Cylinder, 4-Stroke, Air-Cooled |
| Starting System | Electric & Kick |
| Rear Suspension | Dual shock absorbers |
| Length x Width x Height | 1, 980 mm x 740 mm x 1, 080 mm |
| Fuel Tank Capacity | 12 liters |
Guidance on selecting and installing accessories safely to avoid affecting motorcycle performance and rider safety.
Emphasizes wearing a helmet and choosing quality riding apparel for comfort and safety.
Stresses pre-ride inspection and practicing to become familiar with controls for rider and passenger safety.
Encourages riders to stay within their skill limits to ensure safe riding practices and prevent accidents.
Provides specific safety advice for riding in adverse road conditions like wet or slippery surfaces.
Advises against riding at excessive speeds or high engine speeds for safety and control.
Describes the dashboard indicators and their meaning for monitoring the motorcycle's status.
Explains the function of the speedometer and how to read the fuel gauge for riding information.
Describes the meaning of various dashboard indicator lights and the function of the odometer.
Details the proper use of the choke lever for convenient cold and warm engine starting.
Explains how to apply the front brake using the brake lever and its effect on the brake light.
Details how to adjust the rear absorber spring pre-load for rider, load, and driving style.
Illustrates the location and components of the motorcycle's tool kit.
Specifies the maximum load capacity of the rear carrier and its impact on ride balance and chassis integrity.
Provides recommendations for fuel octane rating and engine oil selection for optimal engine performance and longevity.
Outlines throttle limits, gear variation, and tire break-in for proper motorcycle and tire seating.
Warns against maintaining a constant low speed during break-in, which can cause parts to glaze.
Stresses the importance of allowing engine oil to circulate before applying load or revving the engine.
Highlights the significance of the initial 1000 km maintenance for ensuring the motorcycle's service life and performance.
Details the procedures and precautions for starting the motorcycle's engine.
Provides step-by-step instructions for starting the engine in both cold and warm conditions, including choke usage.
Explains the proper use of the transmission for smooth operation and efficient engine performance.
Details how to use the transmission effectively and the potential risks associated with improper gear selection.
Outlines the steps for stopping the motorcycle and parking it securely, including locking the steering.
Step-by-step guide for safely removing the motorcycle battery, emphasizing terminal disconnection order.
Offers guidance on recharging the battery and general care, including safety warnings related to battery acid and gas.
Details the process for removing and cleaning the air filter element, including specific steps and precautions.
Guides on checking the spark plug gap and condition, and selecting the correct replacement plug.
Details the correct procedure for installing a spark plug to prevent damage to the cylinder head threads.
Step-by-step instructions for checking the engine oil level using the dipstick, ensuring it is within the correct range.
Provides a step-by-step guide for changing the engine oil, including draining and refilling with new oil.
Explains how to adjust the clutch cable clearance to ensure proper clutch operation and prevent premature wear.
Guides on adjusting the engine idle speed to the specified RPM range after the engine is fully preheated.
Details the procedure for adjusting the throttle cable play to ensure correct throttle response.
Details the process for adjusting drive chain sag and alignment, ensuring proper tension and sprocket meshing.
Guides on checking the front brake lever free stroke and wear limit, ensuring proper brake function.
Explains how to inspect the front brake wear limit mark to determine when brake shoes need replacement.
Details the procedure for adjusting the rear brake pedal free stroke, ensuring proper rear braking performance.
Guides on inspecting the rear brake wear limit mark to ensure the brake system is properly adjusted and safe.
Lists the standard tire pressures for solo and double riding, crucial for stability and safe operation.
Details how to check tire surface condition, wear indicators, and specifications for safe driving.
Describes the location and function of brake light switches and provides guidance on replacing burnt-out bulbs.
Details steps for preparing the motorcycle for transportation, emphasizing fuel draining and ventilation.
Outlines recommended procedures for storing the motorcycle, including cleaning, battery care, and fuel management.
Details cases that lead to battery discharge, charging methods, and precautions to prevent battery explosion.
To Next Page
