EasyManua.ls Logo

HAPIMP SV-TCQ - Preparing the Camera; Power Supply Options

HAPIMP SV-TCQ
142 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Preparing the Camera
8
External power supply port
supply
2. Preparing the Camera
2.1. Power supply
This camera supports 2 ways of power supply: AA battery or external
power supply.
■A battery: Place 4 pieces 1.5V AA batteries,and make sure the battery
polarity is correct.
■A good option to get longer battery life is to add an external power
supply: At the bottom of camera, there is an external power supply(DC)
port, you can use a 6V 1.5A-2A AC adapter with 3.5mm*1.35mm
DC jack size or you can use a 6V 1.5A-2A trail camera solar panel.
Notice:
It is not recommended to use 1.2V rechargeable batteries, because it
is not enough to support the normal operation of the camera. We
recommend high-performance alkaline batteries (not included).

Table of Contents