Setup Menu and Functions
Target recording time
Select "On" if the camera should only be active during a certain time
period. In the screen menu that subsequently appears, you can then set
the start and ending time for the active phase.
Notice: The camera will not record any images outside of the active
period.
The settings made here will apply every day.
Time lapse
In Time lapse menu, there are three options as below.
[Normal]: The camera will take pictures automatically as per set time
interval. For example,set the interval time to 1 hour, the camera will
take a photo or video each hour(Confirmation according to your work
mode is taken photo or video). If you want to observe that a plant
blooms, the camera will take 24 photos in 24 hours to record the whole
process of blooming.
[TL Video]: You can set the interval time.The time range is from 1
second to 24 hours. For example, set the interval to 1 hour, the camera
will take a photo each hour. If the camera works for 24 hours,there will
be 24 photos. These photos will be converted into a video.
[Off]: Turn off the time lapse function.
Notice:
1. Time-lapse function needs to take multiple pictures to form a
playable file. If the number of pictures taken is too less, the
To Next Page
Loading...