EasyManua.ls Logo

Harbor Breeze 1461042 - User Manual

Harbor Breeze 1461042
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Sailor Bay Ceiling Fan
Harbor Breeze® is a registered trademark
of LF, LLC. All Rights Reserved.
ITEM #1461040
1461041
1461042
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-800-643-0067, 8 a.m. - 8 p.m., EST, Monday - Sunday.
Purchase Date
1
Español p. 21
MODEL #RLG52NWZ5L
RLG52BNK5L
RLG52WW5L
BM19336
4007498
ATTACH YOUR RECEIPT HERE
ADJUNTE SU RECIBO AQUÍ

Questions and Answers

  • T
    thamiltonAug 10, 2025
    Why is my Harbor Breeze 1461042 wobbling so much?
    • L
      Lance SwansonAug 10, 2025
      If your Harbor Breeze Fan wobbles excessively, there are several potential causes. First, ensure that all blade screws are tightened securely. If the blade arms are incorrectly attached, try re-installing them. Unbalanced blades can also cause wobbling; try switching one blade with a blade from the opposite side. Check that the fan is securely mounted by turning the power off and verifying the mounting bracket. If the fan is too close to a vaulted ceiling, use a longer downrod or move the fan. Finally, make sure the set screws on the motor housing yoke and the hanging ball are properly tightened.
  • T
    Troy ShawAug 18, 2025
    Why does my Harbor Breeze Fan operate but the lights fail?
    • C
      Carlos HammondAug 18, 2025
      If your Harbor Breeze Fan operates, but the lights are not working, first ensure the bulb(s) are installed correctly. Also, make sure that the wall switch to the light is on. Check the wires in the canopy. Check that molex connections in light kit fitter are connected properly.
  • A
    aaron51Aug 25, 2025
    How to fix a noisy Harbor Breeze 1461042?
    • J
      Jillian Perkins DDSAug 25, 2025
      If your Harbor Breeze Fan is operating noisily, there are a few things you can check. Start by tightening all blade screws. If a blade is cracked, it will need to be replaced. If you are using a full range dimmer switch, replace it with an approved speed control device. If the fan is new, allow it a “break in” period of a few days, especially when running the fan at Medium and High speeds.
  • T
    Tiffany AndrewsSep 1, 2025
    What to do if my Harbor Breeze 1461042 does not move?
    • A
      Adrian PaceSep 1, 2025
      If your Harbor Breeze Fan isn't moving, start by checking if the reverse switch is fully engaged, pushing it firmly either up or down. Make sure that the power is on and the fuse is not blown. If those aren't the issue, turn the power off, loosen the canopy, and check all wire connections for any faults.

Summary

Safety Information

Package Contents

Hardware Contents

Preparation

Initial Installation

Downrod-Style Fan Mounting

Detailed steps for mounting the fan using a downrod for various ceiling types.

Closemount-Style Fan Mounting

Instructions for mounting the fan directly to the ceiling without a downrod.

Wiring

Final Installation

Operating Instructions

Care and Maintenance

Troubleshooting

Limited Lifetime Warranty

Replacement Parts List

Harbor Breeze 1461042 Specifications

General IconGeneral
BrandHarbor Breeze
Model1461042
TypeCeiling Fan
Blade Span52 inches
Number of Blades5
Reversible MotorYes
Light Kit IncludedYes
FinishBrushed Nickel
Motor TypeAC
Control TypeRemote Control
Mounting OptionsDownrod
ENERGY STAR CertifiedNo
Motor Speed3 speeds

Related product manuals