To Next PageTo Next Page
Need help?Do you have a question about the Harbor Breeze L0982 and is the answer not in the manual?
General| Brand | Harbor Breeze |
|---|---|
| Model | L0982 |
| Category | Fan |
| Language | English |
Choose between standard or angled ceiling mounting for fan installation.
Ensure minimum 7 ft floor clearance and 30-inch wall clearance for fan blades.
Connect the fan's green wire and mounting bracket's green wire to the supply ground.
Connect fan's white wire to supply white and fan's black/blue wires to supply black.
Attach and secure the fan canopy and canopy cover to the mounting bracket.
Assemble blades to irons and attach to motor, then secure switch housing.
Connect the light kit, install bulbs, secure glass shade, and connect pull chain fobs.
Disassemble bottom housing from motor body when not installing the light kit.
Re-attach bottom housing, attach light switch cover, and connect pull chain fob.
Use pull chains for motor speed control (High, Medium, Low, Off) and light On/Off.
Adjust the reverse switch for summer (cooling) or winter (heating) airflow.
Adjust fan angle by altering bars on blade sides for optimal airflow.
Identify and resolve issues causing the fan to make noise.
Address causes of fan wobble, such as loose screws or blade imbalance.
