Gently lubrificate the remote valve before a lengthly stoppage
The torque of the electric motor of the remote valve is very strong. Never place
your finger or any part in the stainless steel ball.
- Remove the plug (1) from the valve.
- Spray aerosol lubrificant on to the spherical valve, turning
the valve at the same time.
- Check for correct rotation of the valve. Failing this, replace
the seals.
- Re-fit the plug to the valve
- Remove the plug (2) to cleaning the piping
- Place the valve in position
0
- Remove plug B and replace with the lubrificator A located on the other side of the valve .
- Lubricate very lightly the spherical part of the valve. Excessive lubrication may lead to clogging
of the spray nozzles.
- Replace the lubricator and plug in their original position.
B
A
B
To Next Page
Loading...
Need help?
General
