Need help?Do you have a question about the Hardi SMARTCOM ISOBUS UT SW A.2.2 Series and is the answer not in the manual?
General| Category | Farm Equipment |
|---|---|
| Model | SMARTCOM ISOBUS UT SW A.2.2 Series |
| Manufacturer | Hardi |
| Display | Touchscreen |
| Software Version | A.2.2 |
| Type | ISOBUS Terminal |
| Compatibility | ISOBUS compatible |
General information about the SmartCom ISOBUS UT system and its use.
List of abbreviations used throughout the instruction book for clarity.
Guidelines for safe operation of the sprayer to prevent accidents and injuries.
Defines the meaning of safety symbols used in the manual.
Recommended precautions and safe operating practices before using the sprayer.
Overview of the SmartCom ISOBUS UT system, its components and layout.
Describes terminal types, layout, symbols, buttons, and external units like SetBox, FluidBox, Grip.
Details Auto Functions, AutoWash, AutoFill, DynamicFluid4, AutoSelect, PrimeFlow, AutoSectionControl, IntelliTrack.
Covers initial system settings, display readouts, and ESC key setup.
Configures boom parameters and performs custom TankGauge calibration.
Configures AutoSelect modes and nozzle combinations for automatic switching.
Guides tractor attachment and IntelliTrack sensor calibration.
Steps to set up volume rate, nozzle type, and registers before spraying.
Adjusts volume rate and manages spray job registers.
Details AutoFill methods and DilutionKit procedures like TankDilution and BoomDilution.
Covers spraying with DynamicFluid4, AutoSelect usage, and end nozzles.
Details AutoWash programs (BoomFlush, FastFlush, MultiRinse) and soak wash.
Provides instructions for storing the sprayer during the off-season.
Details how to adjust the speed sensor and air gap for correct reading.
Explains flow constant calibration and operational problem troubleshooting.
Identifies sensor locations, component names, and provides fuse overviews.
Lists fault codes, descriptions, and emergency limp home modes.
Details specifications for dimension, voltage, current, base board, expansions, and environmental factors.
Lists plugs, wire connections, and recycling information.
To Next Page
