Hardi SMARTCOM ISOBUS UT SW A.2.2 Series - Work Light

5 - Operation
84
4. Select register for the present spray job.
See “Register Readout and Selection” on page 86.
5. Fill the sprayer.
See “AutoFill” on page 87.
6. Start spraying.
Work Light
The work light is turned On by opening the left side cover (A), which
activates a switch (B) inside.
÷
NOTE! To work, first power On the SmartCom UT system.
Select register
Menu
Show register spray data 1
Select register
Total register
Use register 1 to 99 for job.
Scroll to register, then press
Enter to show data
Volume rate
Speed
Prog. rate
Vol. sprayed
RinseTank.
Volume rate
litre/ha
litre/ha
km/h
litre/ha
litre
litre