Need help?Do you have a question about the Hardi Master Plus and is the answer not in the manual?
General| Brand | Hardi |
|---|---|
| Model | Master Plus |
| Category | Farm Equipment |
| Language | English |
States compliance with relevant EU directives and ISO standards for the product.
Provides essential safety information and precautions for operating the sprayer.
Guidelines for minimizing environmental impact and safety during service.
Explains the meaning and importance of various safety labels on the machine.
Identifies and explains components visible from the front, side, and rear of the sprayer.
Introduces the main components of the sprayer's liquid handling system.
Explains the operation of the TurboFiller for chemical filling and rinsing.
Describes the BoomPrime system for priming spray boom tubes before spraying.
Details sprayer components like pressure gauge, footboard, locker, canister, cleaning device, and grip controls.
Defines terms and components related to the 3-folded spray boom.
Covers tractor suitability checks, weight calculations, and load requirements.
Details transmission shaft safety, PTO installation, and quick hitch.
Covers hydraulic system requirements and setup for closed/open centre systems.
Guides control unit installation, power supply, speed transducer, and safety kit.
Covers filter restrictor, EVC unit, BoomPrime, and boom suspension adjustments.
Covers boom maneuvering, unfolding, and folding procedures.
Details filling procedures for water, rinsing tanks, and location requirements.
Provides essential safety precautions and personal protective equipment for chemical handling.
Detailed instructions for filling liquid/powder chemicals and rinsing the TurboFiller.
Explains the functions of the switches on the spray control unit (Spray Box III).
Covers liquid dilution, pre-refill rinsing, agitation, parking, and cleaning.
Details operating limits, tables, and procedures for spraying liquid fertilizer.
Covers lubrication general info, recommended lubricants, and grease gun calibration.
Details 10-hour, 50-hour, and 250-hour service procedures.
Covers pump renewal, valve checks, filter maintenance, and drain valve replacement.
Covers boom readjustment, lift, alignment, and lock adjustments.
Provides a program for storing the sprayer during the off-season and post-storage preparation.
Lists common causes of operational incidents and general checks.
Troubleshooting guide for common faults in the liquid system.
Troubleshooting common issues related to the sprayer pump.
Troubleshooting common faults specific to the Z-version hydraulic system.
Covers mechanical issues and manual operation in case of power failure.
Provides overall dimensions and weight specifications for the sprayer.
Lists specifications for various HARDI pump models and filter details.
Details temperature/pressure ranges, power consumption, residue, and noise levels.
Covers tyre pressure specifications and electrical connection details.
Provides hydraulic diagrams for Z-type spray booms of different working widths.
To Next Page
