3 - Description
16
Roadworthiness
When driving on public roads and in other areas, where the highway code applies, or in areas with special rules and
regulations for marking and lights on implements, you should observe these and equip implements accordingly.
Sprayer Use
The HARDI sprayer is for the application of crop protection chemicals and liquid fertilizers. The equipment must only be used
for this purpose. It is not allowed to use the sprayer for any other purposes. If no local law demands that the operator must
be certified to use spray equipment, it is strongly recommended to be trained in correct plant protection and in safe
handling of plant protection chemicals to prevent unnecessary risk for persons and the environment, when carrying out
your spray job.
Frame
Very strong and compact steel frame with a strong chemically resistant and weatherproof electrostatic lacquer coat. Screws
and bolts etc. have been Delta/Magni treated to be resistant to corrosion.
Identification Plates
CE identification plate fitted on the frame indicates producer name,
identification no., make, model, type, production year, tank capacity and
tare mass for the sprayer.
This plate is located on the front side of the sprayer.
Tanks
The tanks are made of impact-proof polyethylene, resistant to UV radiation and chemicals. The main tank has a purposeful
design with no sharp corners for easy cleaning. The filling hole is placed so it can be accessed from the platform. This ensures
an easy access for the filling of sprays, cleaning of the tank etc. The sprayer may also be equipped with two rinsing tanks and
a clean water tank.
Nominal tank contents are 1200, 1500 or 1800 litres.
To Next Page
Loading...
Need help?
General
