Hardi SMARTCOM ISOBUS UT SW A.2.2 Series User Manual

5 - Operation
94
End Nozzles
When using end nozzles they need to be turned On and Off separately at each side:
1. Press to enter the options menu.
2. Press to enter the end nozzles menu.
3. Select to turn On either left or right end nozzle by pressing:
4. Start spraying.
5. When not necessary anymore, turn Off the end nozzle by pressing:
DilutionKit
DilutionKit is operated from the SmartCom UT as follows:
÷
NOTE! The dilution kit is NOT a rinsing device. For rinsing the sprayer, please refer to “Cleaning” in the sprayers
instruction book for proper cleaning procedure.
TankDilution
When the MainTank is empty then dilute residual spray-liquid before returning to the farm for refilling:
1. Turn off the Main valve ON/OFF.
2. Engage the PTO
3. Press .
Left On
or
Right On
Left Off
or
Right Off
Volume rate Slant angle
Prog. rate
Prog. rate
Prog. rate
Boom pressure
bar
liter / ha
degree
liter / ha
liter / ha
liter / ha

Hardi SMARTCOM ISOBUS UT SW A.2.2 Series Specifications

General

Brand	Hardi
Model	SMARTCOM ISOBUS UT SW A.2.2 Series
Category	Farm Equipment
Language	English