Hardi SMARTCOM ISOBUS UT SW A.2.2 Series User Manual

11
3 - Description
Introduction
About the SmartCom ISOBUS UT System
The SmartCom ISOBUS UT is for use in agricultural and horticultural production. The components are developed to last
many years under agricultural conditions.
The system has a non-volatile memory without battery which simplifies storage. All parameters in the menus are saved in
the memory and are not lost when the power is disconnected.
The transducers utilized are chosen for long service life and good signal quality. The speed and flow transducers has a built-
in diode that will flash thereby indicating it functions, to aid servicing.
Working pictures in the display will be shown in different colours depending on the function used.
Display Readouts
Among many possible display readouts, are:
• Volume rate.
• Speed.
• Liquid rate per minute.
• Total covered area.
• Total volume sprayed.
• A trip register.
μ
The system is also compatible with Variable Rate Application (VRA) and is prepared for communication with Precision
Farming tools (e.g. AutoSectionControl). Data dump of registers and configuration to a personal computer are
possible via a USB key.
Functions Include
• Correct area with closure of up to 13 spray boom sections.
• Many alarm functions and possibility for audio/visual alarm, etc.
• Many warnings depending on operation. Alarms and warnings is shown:
• UT/VT screen: in the bottom left 1/4 corner of the display.
• HC 8500/8600 and HC 9500/9600 series displays: show alarms in the top bar of the screen.
• HC 8700 and HC 9700 series displays: show alarms in a pop-up window at the top of the screen.
Main Components Location
SmartCom Terminal (e.g. HC 9600 or HC 9700) Tractor/Self-propelled
Grip Tractor/Self-propelled
SetBox Tractor/Self-propelled
FluidBox Sprayer/Self-propelled
SmartCom Sprayer/Self-propelled

Hardi SMARTCOM ISOBUS UT SW A.2.2 Series Specifications

General

Brand	Hardi
Model	SMARTCOM ISOBUS UT SW A.2.2 Series
Category	Farm Equipment
Language	English