Hardi SMARTCOM ISOBUS UT SW A.2.2 Series User Manual

5 - Operation
102
AutoWash Programs
There are 3 wash programs available.
BoomFlush
1. Go to AutoWash by pressing .
2. Press to enter BoomFlush.
3. Begin driving in the field just sprayed (A). Spray at normal driving
speed to avoid over-dosing.
4. Press to start the program.
5. In field (A), drive approximately 500 metres (9 km/h) until
BoomFlush has finished.
÷
NOTE! When doing a BoomFlush the MainTank contents will be increased with 40 litres. This is solely spray-liquid that
are primed back to the MainTank before clean rinse water is directed to the nozzles.
The following diagram show the valve positions during the BoomFlush program.
A
11:14
12:14
13:14
14:14
Pressure
SmartValve
Suction
SmartValve
Main Spray
ON/OFF
CycloneFilter
Boost Line
Valve
Agitation
Valve

Hardi SMARTCOM ISOBUS UT SW A.2.2 Series Specifications

General

Brand	Hardi
Model	SMARTCOM ISOBUS UT SW A.2.2 Series
Category	Farm Equipment
Language	English