4 - System setup
4.98
• Vehicle Offsets
Adjust GPS offsets for the Antenna Tab and the Hitch Tab. For more information, see “Vehicle Offsets” on page 4.72.
• Offsets
For more information, see “Swath Section Offsets” on page 4.73.
• Norac UC5
Adjust AutoTerrain/AutoHeight/AutoSlant settings - see also “SafeTrack/IntelliTrack” on page 4.98. For further
information, please refer to the AutoTerrain/AutoHeight/AutoSlant UC5 instruction books.
SafeTrack/IntelliTrack
For ISOBUS the Implement Modelling can be
selected. This allows display to accurately calculate
path of a sprayer equipped with steering.
Configuration
Select Your Specific
Configuration
Offsets
Implement Offsets: Hardi Commander
Implement
Liquid with Hardi
Implement Modeling
Implement Provides a Rear Hitch
Hitch to Axle
Distance
Lateral Offset from Centerline
Left
Implement Type
Standard
Front Hitch to Rear Hitch
Implement Rear Hitch
Heading
Aggressiveness
Boom Control
To Next Page
Loading...
Need help?
General
