Hardi HC 9500 User Manual

4 - System setup
4.29
39. Select Primary Speed Source.
• Trailer sprayer with SafeTrack/IntelliTrack:
Must always use “Hardi” as speed source as
the steering system cannot use GPS as
speed source.
• Lift mounted sprayer:
Can select between “Display GPS” or
“Auxiliary Device” as speed source.
÷
NOTE! If “Display GPS” is selected, the “Hardi”
option must be selected as backup source.

ATTENTION! For additional information see
“Speed Input Settings” on page 4.70.
40. “Hardi” is now selected as Primary Source.

ATTENTION! No other source can be
selected when “Hardi” is selected as primary
source.
Press to confirm the selection.
41. Suggested Name for Configuration:
A. Press button to change name.
B. Press to confirm selection.
Operating Configuration Wizard: Speed Source
Primary Source
Backup Source
Auxiliary Device Channel
Auxiliary Channel Calibration
Calibrate
Distance
Pulses / 100 ft
Display GPS
Auxiliary Device
Radar
Operating Configuration Wizard: Speed Source
Primary Source
Hardi
Operating Configuration Wizard: Configuration Name
Suggested Name for Configuration
JD 4630, Hardi Commander

Hardi HC 9500 Specifications

General

Brand	Hardi
Model	HC 9500
Category	Controller
Language	English