Hardi HC 9500 User Manual

4 - System setup
4.31
45. Trailer sprayers only:
A. If applicable, select “Hardi SafeTrack”
as implement Type.

ATTENTION! For IntelliTrack sprayers, select
the “Hardi SafeTrack” option.
B. Press to type in the measured
distance from Hitch to the axle of the
sprayer.
C. Press to confirm.
50. Press “Automatic Swath Control” to edit the
configuration.
Implement Offsets: Hardi Commander
Implement Liquid with Hardi ISOBUS
Implement Modeling
Implement Provides a Rear Hitch
Hitch to Axle
Distance
Lateral Offset from Centerline
Left
Implement Type
Hardi SafeTrack
Front Hitch to Rear Hitch
Implement Rear Hitch
Heading
Aggressiveness
Boom Control
Configuration Setup
1
Vehicle
JD 4630
Vehicle
Offsets
Norac
UC5
Speed
Input
Auxiliary
Input
Automatic
Swath Control
Equipment
Settings
Offsets
Implement: Hardi Commander Controller: Hardi ISOBUS
Full Swath:
Sections:
120 ft
12
Device:
Make:
ISOBUS
Hardi International A/S

Hardi HC 9500 Specifications

General

Brand	Hardi
Model	HC 9500
Category	Controller
Language	English