5
www.hardlifeutility.com
DIMENSIONS C2020/C2040 End Panels
Overall Dimensions (m) 6W X 5.6H
TOOLS REQUIRED FOR INSTALLATION
1. Measuring tape
2. Step ladder
3. Sledge hammer
4. Scissors
5. Knife
6. Welding Machine
SITE PREPARATION
To prepare the site for installing the front and back panels of the shelter:
1. Ensure that all the components are present by checking with the Component List prior to installation.
2. Lay out all the components within the marked-out site, in the approximate locations at which they will be
assembled. is makes preliminary work easier on an open, clear space rather than having parts scattered
in the way.
FRONT / BACK PANEL SPECIFICATIONS
To Next Page
Loading...
