INTRODUCTION
Thank you for purchasing the original all stainless steel Hardy Outside Woodburning
Heater. It represents the result of many years of Hardy experience and the input of Hardy
customers in the production of a top quality heater. With the purchase of this Hardy
Heater, you can now appreciate the high degree of craftsmanship and reliability that have
made The Hardy the leader in the Outside Woodburning Heater field. This manual will
provide you with a good basic understanding of the installation and operation of this
heater.
THIS MANUAL INCLUDES IMPORTANT SAFETY INFORMATION.
Your new heater should have the following:
(1) Owner’s manual complete with Installation
and Hook-Up Instructions
(2) Warranty & Return Warranty Card
(3) A tube of silicon (located in the firebox for shipping)
(4) Smoke stack and condenser tank stack both
with trim (located in firebox for shipping)
(5) Six cast iron grates (located in firebox)
(6) One Air tube & Two Channel Beams (located in firebox)
(7) Shovel (located in the firebox for shipping)
(8) Stainless steel panel and insulation that will be
located between the firebox door & ash door
after installation of the heater.
(9) Welded steel flame baffle (located in firebox)
(10) 3/8” steel plate
Should your heater not have any of these items or if you have any questions regarding the
operation or maintenance of your heater, please consult you local Hardy dealer.
Again, thank you for purchasing a Hardy Heater.
Sincerely,
Frank L. Moore
President
Hardy Manufacturing Co., Inc.
(MODEL H25)
i
To Next Page
Loading...
