2005 PDI: CVO Models 7-15
DELIVERING VEHICLE WITH
REMOVABLE PASSENGER
BACKREST INSTALLED
If the customer wishes the vehicle to be delivered with the
removable passenger backrest (see Figure 7-26.) installed on
the vehicle instead of the Tour-Pak, follow the instructions
below.
Passenger Backrest
NOTE
If the Tour-Pak is installed on the vehicle, it must be removed.
See Figure 7-25. Mount the passenger backrest assembly on
the two forward mounting points (1) on each side of the vehi-
cle.
Radio Antenna
NOTE
See Figure 7-27. With the antenna mast mounted on the
Tour-Pak antenna mount, the coaxial adapter shown in the
figure allows connecting the antenna cable to the chassis
antenna mount. With Tour-Pak removed, the adapter may be
removed and antenna mast threaded directly onto the chas-
sis antenna mount.
1. See Figure 7-28. Unscrew coaxial adapter (1) from
antenna chassis mount. Place coaxial adapter in Tour-
Pak and deliver to customer with vehicle.
2. Screw antenna (3) onto chassis mount and tighten set
screw with allen wrench (4).
Figure 7-27. Coaxial Adapter
pd0220
Figure 7-28. Installing Antenna (Tour-Pak Removed)
10675
10676
10677
1. Coaxial adapter
2. Antenna chassis mount
3. Antenna
4. Allen wrench
1
4
2
3
To Next Page