7-14 2005 PDI: CVO Models
RADIO ANTENNA
See Figure 7-24. Screw antenna (1) into antenna mount (2)
on Tour-Pak and tighten set screw with allen wrench (3).
REMOVABLE PASSENGER
BACKREST
See Figure 7-25. The passenger backrest assembly mounts
on the two forward mounting points (1) on each side of the
vehicle when the Tour-Pak is not installed.
Since the vehicle will ordinarily be delivered to the customer
with the Tour-Pak installed, store the removable passenger
backrest inside the Tour-Pak and deliver to customer with
vehicle.
NOTE
Retain protective cardboard packaging for passenger back-
rest. Secure backrest in Tour-Pak to prevent damage to back-
rest assembly and interior of Tour-Pak.
Figure 7-24. Installing Antenna on Tour-Pak
10680
1. Antenna
2. Antenna Tour-Pak mount
3. Allen wrench
1
2
3
Figure 7-25. Passenger Backrest and Tour-Pak
Docking Locations
Figure 7-26. Passenger Backrest
10681
1. Passenger backrest mounts
2. Tour-Pak bracket mount
1
2
10707
1. Rear latch (2)
2. “C” bracket guides (2)
1
2
To Next Page