2005 PDI: Sportster Models 5-1
SPECIFICATIONS 5.1
TORQUE VALUES
The following torque values are included for fasteners that
may be loosened and tightened during Predelivery and
Setup. Any fasteners that are not loosened/removed do not
need to be checked during predelivery and setup.
2005 SPORTSTER MODELS
SPECIFICATIONS
Idle Speed: 950 RPM at
Operating Temperature
Use 950 RPM during Predelivery and Setup adjustments.
Engine idle speed may increase during engine break-in. Use
idle speed listed in the Sportster Models Service Manual at
Initial Maintenance check.
Table 5-1. Torque Values
ITEM TORQUE NOTES
Handlebar clamp screws (front and rear) 12-18 ft-lbs 16.3-24.4 Nm
Front brake master cylinder cover screws 9-17 in-lbs 1.0-2.0 Nm
Mirror fasteners 96-144 in-lbs 10.9-16.3 Nm
Battery terminal screw (positive and negative) 40-50 in-lbs 4.5-5.7 Nm
Table 5-2. Capacities
Component ENGLISH METRIC
Oil tank w/filter (Dry) 3.6 qt. 3.4 liters
Transmission/Primary
Chaincase
32 oz 946 ml
All motorcycles are shipped with 20W50 Harley-Davidson
360 Motor oil
1
To Next Page
Loading...