GENERAL:
CONTROLS
AND INDICATORS
iRead
the
CONTROLS
AND INDICATORS section before
iilding
your
motorcycle.
Failure to understand the operation
olthe
motorcycle
could
result in death or serious injury.
,,{QfiHi}a)
Some
features
explained
are unique to certain models. These
may
be
available as accessories for
your
Harley-
motorcycle.
See a Harley-Davidson
dealer
for
a
lisl of accessories
that will fit
your
specific
motorcycle.
EADLAMP
KEY
SWITCH:
MODELS
Do not operate vehicle with forks locked. Locking
the forks
restricts the vehicle's turning
ability, which could result
in
death or serious
injury.
(00035a)
Do not lubricate
barrel
locks
with
petroleum
based lubric-
ants or
graphite.
Inoperative
locks may result.
(00152a)
Do not switch lubricant
brands
indiscriminately
because
some
lubricants interact
chemically when mixed.
Use of
inferior lubricants
can damage the engine.
(00184a)
To remove the key from the ignition
on FLHR models,
push
the key in and turn it
counterclockwise.
To remove the key from the ignition
on FLHT models,
push
the key in
and
turn
clockwise.
Remove the key.
NOTES
Harley-Davidson recommends removing key
from
ignition/fork
lock before operating motorcycle. lf
you
do
not remove key, it can fall
out during operation.
ACCESS/ACCESSORY
-
Accessories
and hazard warning
flasher can
be
turned
on.
lnstrument
lamps are on. Brake
lamp and horn
can be activated. Key may be removed.
The lamps illuminate when
the switch is in the IGNITION
position,
as
required
by law in some localities.
automatic-on
headlamp feature
provides
increased
of
the rider to other motorists. Be sure headlamp
on
at alltimes.
Poor visibility
of
rider to
other
motorists
result
in
death
or
serious
injury.
(00030b)
YOUR OWNER'S
MANUAL section. Be
sure
to record
all
key
numbers in the space
provided
at the front
of
this
Figure
2. The ignition/headlamp key
switch controls elec-
functions
of the motorcycle.
your
vehicle
against theft. After
parking
your
lock the steering head and remove ignition
frcm
switch.
Failure
to lock
your
motorcycle may result
and/or equipment damage.
(00151a)
Table 1
8.
lgnition/Headlamp
Switch Positions: 2007 Touring Models
3.
Locks the switch in
either
the FORK LOCK
or
ACCESS
switch
position.
Remove
the key for security.
Unlocks the
switch. Unlocked,
the
switch can be rotated to any of the 4
positions.
To
prevent
loss when riding, remove
the key.
Insert the key, rotate
the switch to FORK LOCK and
press
the
switch down.
Turn the
key to LOCK and the fork is locked. To
unlock the
fork,
insert and rotate
the key to UNLOCK
and
the
switch
will
pop
up.
When switch is in
OFF
position,
the ignition,
lamps and accessories
are off
When the switch is in the IGNITION
position,
the motorcycle can
be started and
all
lamps
and accessories will operate.
When the
switch
is in
the ACCESS
position,
all
the lamps
and accessories will
operate but the engine can not be started. In ACCESS, the
switch can be locked.
SWitch
is locked
or unlocked by lifting switch cover, inserting key
and turning key counterclockwise
to
lock,
clockwise to unlock. Key may be removed in
any
position.
lgnition, lamps
and accessories are off.
Accessories
are on.
Hazard
warning flashers can be left
on.
Instrument
lamps
are on. Brike lamp and horn can be
activated.*
lgnition, lamps and
accessories are on.*
models
have an additional function. Position lamp
and
tail lamp
are also on.
E-13
To Next Page
Loading...