Harley-Davidson Dyna 2008 - MAINTENANCE SCHEDULE 1.2; GENERAL

1.2MAINTENANCE SCHEDULE
GENERAL
The table below lists the periodic maintenance requirements
for Dyna model motorcycles. If you are familiar with the proced-
ures, just refer to the table for the recommended service
interval. If necessary, see the quick reference table (Table 1-2)
for the required specifications.
If more detailed information is needed, turn to the sections
which follow for step-by-step instructions.
Also, throughout this manual, you will be instructed to use
various lubricants, greases and sealants. Refer to Table 1-3.
for the correct part numbers of these items.
Table 1-1. Regular Service Intervals: 2008 Dyna Models
NOTES25,000 MI.
40,000 KM
20,000 MI.
32,000 KM
15,000 MI.
24,000 KM
10,000 MI.
16,000 KM
5000 MI.
8000 KM
1000 MI.
1600 KM
PROCEDUREITEM SERVICED
XXXXXXReplaceEngine oil and filter
XXXXXXInspect, service as requiredAir cleaner
XXXXXXCheck pressure, inspect treadTires
1, 4XXXCheck tightnessWheel spokes
XXXReplacePrimary chaincase lubricant
XXReplaceTransmission lubricant
1XXXXXXCheck adjustmentClutch
1XXXXXXInspect, adjust beltRear belt and sprockets
1XXXXXXCheck, adjust and lubricateThrottle, brake and clutch controls
1XXXInspect and lubricateJiffy stand
1XXXXXXInspect for leaksFuel, lines and fittings
1XReplaceFuel pump filter
5XXXXXXCheck levels and conditionBrake fluid
XXXXXXInspect for wearBrake pads and discs
XXXXXXInspectSpark plugs
XReplace
XXXXXXCheck operationElectrical equipment and switches
1, 6ReplaceFront fork oil
1, 2XXXAdjustSteering head bearings
1Inspect every 30,000 miles (48,000 kilometers)Rear fork bearings
1XXXCheck tightnessCritical fasteners
1XXInspectEngine mounts and stabilizer links
3Check battery and clean connectionsBattery
3XXXXXXInspect for leaks, cracks, and loose
or missing fasteners or heat shields
Exhaust system
XXXXXXVerify component and system func-
tions
Road test
1. Should be performed by an authorized Harley-Davidson dealer, unless you have the proper tools, service data and are
mechanically qualified.
NOTES:
2. Disassemble, lubricate and inspect every 30,000 miles (48,000 kilometers).
3. Perform annually.
4. Not all vehicles are equipped with spoke wheels. Consult appropriate topic in service manual.
5. Replace D.O.T. 4 HYDRAULIC BRAKE FLUID and flush system every two (2) years.
6. Disassemble, lubricate and inspect every 50,000 miles (80,000 kilometers).
2008 Dyna Service: Maintenance 1-5