1. Expander ring
2. Bottom oil rail
3. Top oil rail
4. Second compression ring
5. Top compression ring
6. Front
7. Rear
Figure 3-111. Piston Ring Gap Alignment
INSTALLATION OVERVIEW
See 3.16 TOP END OVERHAUL: ASSEMBLY.
1. Attach piston to connecting rod.
2. Install cylinder.
3. Install cylinder head.
4. Install push rod covers and push rods.
5. Install rocker arm support plate.
6. Install breather assembly.
7. Continue with vehicle assembly as directed.
3-80 2008 Dyna Service: Engine
To Next Page