Harman Kardon 100+ - SERVICE AND TROUBLESHOOTING; WARRANTY SERVICE AND FACTORY CONTACT

SPECIAL APPLICATION
The versatility of the 100 + receiver permits the utilization of 2 completely
separate stereo systems reproducing different program material.
Typical Example
System # 1 - Connect left and right speakers to the front left and right speaker
terminals.
System # 2 - Connect left and right speakers to the back left and right speaker
terminals.
Connect a pair of patch cords from the front tape out receptacles to the
front tape monitor receptacles.
Connect a stereo tape recorder output to the back tape monitor re-
ceptacles.
Mode switch to 4-CH Discrete position.
With the tape monitor 1 switch depressed, System # 1 will reproduce any
source selected by the function switch. System # 2 will reproduce the output
of the tape recorder.
FRONT L 1,7,
Roo
BACK ~
SYSTEM I
TAPE TAPE
MON. OUT
I I
R
L
The volume control should be used to set the overall level.
The sound field Balance control should be used to alter the levels of the
separate systems.
The front and back Tone controls will function separately for each system.
The Stereo 4-CH rear panel switch must be in the 4-CH position.
SERVICE
If this instrument should not perform properly during the first two (2) years
after date of purchase, contact the factory for instructions. The factory has many
authorized warranty service stations in the United States. To aid us in selecting
a service station convenient to you, it would be helpful if you would indicate
which major city is closest to your home. Please write our Customer Service
Department, Harman/Kardon, Incorporated, Plainview, New York 11803. Be
sure to include the model and serial number of the unit. A brief description of
your other components is often of help in answering your questions. DO NOT
return this instrument to Harman/Kardon without first receiving authorization.
STEREO TAPE RECORDER
OR ANY OTHER HIGH
LEVEL STEREO SOURCE
16
L R FRONT
BACK
SPEAKERS
R
L
SYSTEM 2