Harman Kardon AVI 250 - Unpacking and Installation; Carton and Shipping Materials; Installation Location Guidelines; Conventions

How to Connect a Plug
The wires in the mains lead are coloured
in accordance with the following code:
BLUE — “NEUTRAL” (“N”)
BROWN 3 “TIVE” (“L”)
1. The BLUE wire must be connected to
the terminal which is marked with the
letter “N” or coloured BLACK.
2. The BROWN wire must be connected
to the terminal which is marked with the
letter “L” or coloured RED.
3. Do not connect either wires to the
earth terminal in the plug which is
marked by the letter “E” or by the safety
earth symbol or coloured green or
green-and-yellow.
Before replacing the plug cover, make
certain that the cord grip is clamped over
the sheath of the lead — not simply over
the two wires.
Safety Information
3
Unpacking and Installation
The carton and shipping materials used
to protect your new receiver during ship-
ment were specially designed to cushion
it from shock and vibration. We suggest
that you save the carton and packing
materials for use in shipping if you move
or should the unit ever need repair.
To minimize the size of the carton in
storage, you may wish to flatten it. This
is done by carefully slitting the tape
seams on the bottom and collapsing the
carton down to a more two dimensional
appearance. Other cardboard inserts may
be stored in the same manner. Packing
materials that cannot be collapsed
should be saved along with the carton in
a plastic bag.
If you do not wish to save the packaging
materials, please note that the carton
and other sections of the shipping protec-
tion are recyclable. Please respect the
environment and discard those materials
at a local recycling center.
HSITONA
Conventions
In order to help you use this manual
with the remote control, front panel
controls, rear panel connections and
on-screen menus, certain conventions
have been used.
EXAMPLE -— (bold type) indicates a
specific remote control or front panel
button, or rear panel connection jack
EXAMPLE — (OCR type) indicates a
message that is visible through the on-
screen menu system
ka — (number in a square) indicates a
specific front panel control
@ — (number in a circle) indicates an
indicator in the main front panel display
- @ — (number in an oval) indicates a
button or indicator on the remote
@) — (letter in a circle) indicates a rear
panel Audio or System connection
FEN — (letter in a square) indicates a
specific rear panel video connection