To Next PageTo Next Page
Need help?Do you have a question about the Harman Kardon AVI150 and is the answer not in the manual?
General| Type | Integrated Amplifier |
|---|---|
| Channels | 2 |
| Power Output | 50W per channel (8 ohms) |
| Total Harmonic Distortion | 0.1% |
| Speaker load impedance | 8Ω to 16Ω |
| Input Impedance | 47k ohms |
Instructions for safely handling the power cord and avoiding damage to it.
Guidance on selecting an appropriate location for the unit to ensure stability and optimal performance.
Steps to take before relocating the amplifier to prevent damage or disconnections.
Warning against opening the unit to prevent electric shock and voiding the warranty.
Instructions on how to clean the unit using soft cloths and mild solutions.
Button to turn the amplifier on and off, also acts as a system power switch.
Port for private listening with stereo headphones; impedance recommendations provided.
Allows selection of speaker combinations (1 pair, 2 pairs, or headphones).
Selects between front and rear VCR 2 jacks for input.
Button for initiating VCR recording and dubbing functions.
Cycles through different surround sound modes like Dolby Pro Logic, Dolby 3 Stereo, and Hall.
Adjusts center channel sound reproduction based on speaker type (Norm, Wide, Phantom).
Button to choose the audio input source from various options like VCR, CD, Tuner.
Adjusts low-frequency sound levels for the left and right channels.
Adjusts high-frequency sound levels for the left and right channels.
Balances the sound volume between the left and right channel speakers.
Front panel jacks for connecting video and audio sources from VCR or camcorder.
Compensates for human ear response at low listening levels by boosting frequencies.
Adjusts the overall sound volume for all channels.
Displays the current volume setting.
Shows device status and IR sensor location.
Generates test tones for speaker connection verification in surround modes.
Monitors sound from the cassette deck connected to TAPE 2 MON input.
Connects turntable ground lead to minimize hum.
Connects the line output of a tuner.
Connects a turntable with MM cartridge for phono input.
Provides an additional stereo input for various sources like CD players or VCRs.
Connects the output cable of a compact disc player.
Connects the line output of a cassette deck.
Connects the line input of a cassette deck.
Connects cassette deck output for monitoring or external processors.
Connects cassette deck input for recording, unaffected by EQ/volume.
Connects VCR 1 video and audio output to the amplifier.
Connects VCR 1 audio/video output to the amplifier's input.
Connects VCR 2 or VDP video and audio output to the amplifier.
Connects video output to a TV or monitor.
Connects to other Harman Kardon components for system control.
Allows remote operation from another room via an IR sensor adapter.
Connects to external amplifiers for front, center, and rear channels, or pre-amplifier inputs.
Connects main left and right speakers to the amplifier's terminals.
Connects center and rear speakers to the amplifier.
Connects the amplifier to an AC power outlet.
Explains the concept of surround sound and its effect on audio experience.
Describes the different surround sound modes: HALL, DOLBY 3 STEREO, DOLBY PRO LOGIC SURROUND.
Guides on selecting speaker operation mode based on the speaker system for Dolby Surround.
Mode for small center speakers, bass rerouted to front speakers.
Mode for medium to large center speakers, bass from center speaker.
Mode without a center speaker; sound rerouted to front speakers.
Mode for front/center speakers, rear channel output to front speakers.
Steps for operating the amplifier section, including volume and input selection.
Instructions for recording audio onto cassette decks TAPE 1 or TAPE 2.
Steps for copying audio tapes from cassette deck 1 to cassette deck 2.
Explains amplifier protection mechanisms like thermal, overdrive, and short circuits.
Location for the IR emitter; proper aiming is crucial for remote operation.
Turns the amplifier on and off, with automatic power-on for input selection.
Buttons for tuning radio stations on a Harman Kardon tuner.
Scans through preset station frequencies when used with a tuner.
Used for preset tuning or selecting CD tracks.
Controls for CD player functions like play, pause, skip, and search.
Controls for cassette deck operations like play, pause, stop, and rewind.
Adjusts surround sound delay time for Dolby Pro Logic and HALL modes.
Selects the desired input source for the amplifier.
Adjusts the center speaker's sound level in specific surround modes.
Selects the center channel mode, affecting sound reproduction.
Generates test sounds to verify speaker connections and levels.
Adjusts the rear speaker sound levels for optimal surround effect.
Controls the overall volume for front, center, and rear channels.
Controls the dimming and turning off of the display.
Sets the receiver to automatically turn off after a specified time.
Temporarily silences the speakers.
Location for the remote control's AA batteries.
Technical specifications for stereo mode power output and impedance.
Power output and impedance specifications for surround sound channels.
Specifications for amplifier characteristics like HCC, feedback, response, slew rate, and rise time.
Specifications for preamplifier performance including S/N ratio, input sensitivity, and tone control range.
Physical dimensions of the unit in inches and millimeters.
The weight of the unit in pounds and kilograms.
Statement of compliance with technical standards and directives, including CE marking.
