Harman Kardon AVR 247 Worksheet

AVR 247 WORKSHEETS
Table A4 – Source Input Settings
Source DVD HDMI 1 HDMI 2 Video 1 Video 2 Video 3 Video 4 The Bridge/DMP CD Tape Tuner 6-/8-Channel XM
Title
Video Input
Audio Input The Bridge/DMP Tuner 6-/8-Channel Tuner
Auto Poll
Surround Mode
Tone Mode
Bass
Treble
Video Mode
Table A5 – Speaker/Channel Settings
Source DVD HDMI 1 HDMI 2 Video 1 Video 2 Video 3 Video 4 The Bridge/DMP CD Tape Tuner 6-/8-Channel
††
XM
Left/Right Speaker Size N/A
Center Speaker Size N/A
Surround Speaker Size N/A
Subwoofer N/A
Left/Right Speaker Crossover N/A
Center Speaker Crossover N/A
Surround Speaker Crossover N/A
Subwoofer Crossover N/A
Left Channel Level
†††
Right Channel Level
†††
Center Channel Level
†††
Surround Left Channel Level
†††
Surround Right Channel Level
†††
Surround Back Left Channel Level
†††
Surround Back Right Channel Level
†††
Subwoofer Channel Level
†††
The 6-/8-Channel Inputs are “direct” inputs, meaning their signals are passed directly to the volume control without any bass management processing. Thus, the speaker sizes are always full range,
and it isn’t possible to adjust speaker size or crossover.
Channel levels vary by surround mode rather than source input.
††
†††
AVR247WebDiagrams-SttgsWkSht 4/20/07 3:41 PM Page 2

Harman Kardon AVR 247 Specifications

General

Number of Channels	7.1
HDMI Inputs	2
HDMI Outputs	1
Dolby Digital	Yes
DTS	Yes
Type	AV Receiver
Signal-to-Noise Ratio	100 dB
Input Sensitivity	200mV
Input Impedance	47k ohms
Component Video Inputs	3
Component Video Outputs	1
Digital Audio Inputs (Optical)	2
Digital Audio Inputs (Coaxial)	2
Analog Audio Inputs	5
Total Harmonic Distortion	0.07%
Composite Video Inputs	4
Composite Video Outputs	1
Ethernet Port	No
USB Port	No
Wi-Fi	No
Bluetooth	No
Power Output	50W
Output Power	50 watts per channel (8 ohms, 20Hz-20kHz, 0.07% THD)
Frequency Response	10Hz – 100kHz (+0dB, –3dB)
Surround Sound Formats	Dolby Digital, DTS