Harman Kardon AVR 3000 User Manual

AVR 3000Audio/VideoReceiver
OWNER’S MANUAL
AVR 3000
Power for the Digital Revolution
™
®

Harman Kardon AVR 3000 Specifications

General

Type	AV Receiver
Channels	5.1
Total Harmonic Distortion	0.07%
Input Sensitivity	200mV
Signal to Noise Ratio	100dB
Surround Sound Formats	Dolby Digital, DTS
Bluetooth	No
Wi-Fi	No
Ethernet	No
USB Port	No
Phono Input	Yes
AM/FM Tuner	Yes
Frequency Response	10Hz - 100kHz

Summary

Introduction to the AVR 3000

Safety and Installation Guidelines

Important Safety Information

Essential precautions for operating the AVR 3000 safely, including voltage, cord handling, and cabinet.

Front Panel Controls Overview

Rear Panel Connections Guide

Installation and Connections Guide

Audio Equipment Connections

System Configuration Procedures

Speaker Selection and Placement

Initial Setup and OSD Usage

Steps for first power-on, using On-Screen Display (OSD), and selecting display modes.

Input-Specific Settings

Configuring settings like surround mode and speaker setup for each input source.

Input Setup Procedures

Step-by-step guide for selecting and configuring input sources.

Surround Mode Configuration

Setting preferred surround modes for each input source.

Speaker Setup Configuration

Adjustments for Other Inputs

Independent Settings and Delay

Output Level Adjustment

Procedure for adjusting output levels for optimal sound performance.

Using EzSet for Calibration

Using the EzSet remote for automatic output level calibration.

Manual Output Level Adjustment

Manually adjusting output levels using the OUTPUT ADJUST menu.

Output Level Trim Adjustment

Adjusting output levels using program material or test signals.

Operation Modes and Functions

Basic Operation and Power Management

Source Selection and Controls

Surround Mode Chart

Surround Mode Selection

Digital Audio Playback Formats

Information on Dolby Digital, DTS, PCM, and MP3 audio playback.

Output Level Trim and Direct Input

Tuner Operation and Preset Tuning

RDS Operation and Program Search

Remote Control Programming

Programming Remote with Codes

Methods for programming the remote to control other devices using codes.

Direct Code Entry Method

Easiest method for programming the remote using 3-digit codes.

Macro Programming

Creating macros to repeat sequences of commands with one button.

Volume Punch-Through

Programming the remote to control volume across devices.

Channel Control Punch-Through

Programming the remote to change channels on other devices.

Transport Control Punch-Through

Programming the remote for transport controls on other devices.

Resetting the Remote Memory

Resetting the remote to original factory defaults and command codes.

Setup Code Tables for Remote Programming

TV Setup Codes

List of 3-digit codes for programming the remote to control TV brands.

VCR Setup Codes

List of 3-digit codes for programming the remote to control VCR brands.

CBL Setup Codes

List of 3-digit codes for programming the remote to control Cable TV providers.

CD Setup Codes

List of 3-digit codes for programming the remote to control CD players.

SAT Setup Codes

DVD Setup Codes

Troubleshooting Guide and Processor Reset

Common Troubleshooting Issues

Solutions for common problems like no power, no sound, or remote issues.

Processor Reset Procedure

Steps to reset the AVR 3000's system memory to clear malfunctions.