How to fix a Harman Kardon Receiver that won't turn on?
If your Harman Kardon Receiver isn't turning on when you push the Main Power Switch, ensure the AC power cord is plugged into a working outlet. Check to see if the outlet is switch-controlled.
Why is the display not lighting up on my Harman Kardon Receiver?
To address the issue where the Front-Panel Display of your Harman Kardon Receiver does not light up but sound is present, follow the instructions in the Display Brightness section on page 36 so that the display is set to VFD FULL, as the display brightness may be turned off.
What to do if my Harman Kardon AVR 4000 Receiver remote is not working?
If your Harman Kardon Receiver doesn't respond to the remote, first, replace the remote batteries. If that doesn't work, ensure the AVR selector is pressed. Also, make sure nothing is blocking the remote sensor on the front panel, or connect a remote sensor.
Why is there no sound from surround speakers on my Harman Kardon AVR 4000?
If you're not getting any sound from your surround or center speakers on your Harman Kardon Receiver, it might be due to an incorrect surround mode. Try selecting a mode other than Stereo. Also, check your speaker mode and speaker-wire connections. If you are using (analog or digital) Dolby surround modes, the surround decoder may not create rear-channel information from nonencoded programs if you are using Stereo or Mono program material.
What to do if my Harman Kardon AVR 4000 Receiver has display lights but no sound?
If your Harman Kardon Receiver displays lights but produces no sound or picture, first ensure that all input and speaker connections are secure. If the mute function is enabled, press the Mute button. Also, check the volume control and increase it.
Why does my Harman Kardon AVR 4000 Receiver have no sound and a red power light?
If there's no sound coming from any speaker and the light around the power switch on your Harman Kardon Receiver is red, it's possible the amplifier is in protection mode. Check the speaker-wire connections for shorts at both the receiver and speaker ends. The issue might also be due to internal problems; in that case, contact your local Harman Kardon service depot.
What causes buzzing in the Harman Kardon Receiver tuner?
If you are experiencing intermittent buzzing in the tuner of your Harman Kardon Receiver, try moving the unit or antenna away from computers, fluorescent lights, motors, or other electrical appliances, as the issue might be due to local interference.
Overview of the AVR 4000's capabilities and advanced features.
Safe placement, cleaning, and moving guidelines for the unit.
Precautions regarding power cords, cabinet opening, and unpacking.
Detailed description of each front panel button and dial.
Explanations for all indicators on the front panel display.
Detailed list and description of all rear panel jacks.
Comprehensive guide to remote control buttons and functions.
Operating the AVR from a second room using the Zone II remote.
Connecting audio and video equipment to the AVR.
SCART A/V setup and system power connections.
Multiroom audio, external amplifier, and decoder connections.
Speaker selection and optimal placement for sound.
Using the On-Screen Display for first-time configuration.
Setting up input sources and surround modes.
Adjusting surround sound delay and night mode.
Calibrating speaker output levels using EzSet or manually.
Future expansion and system memory backup.
Core functions like power, volume, source selection, and headphones.
Choosing and using various surround sound modes.
Playing digital sources including Dolby Digital, DTS, PCM, MP3.
Tuning stations, RDS features, and presets.
Tuning FM stations and viewing RDS information.
Finding stations by program type.
Adjusting display brightness and turn-on volume.
Configuring semi-OSD and full-OSD display behavior.
Configuring and operating the multiroom audio system.
Programming remote codes for other devices.
Teaching new codes and creating command macros.
Managing device functions and punch-through features.
Resetting the remote to factory default settings.
Remote control codes for TV devices.
Remote control codes for VCR devices.
Remote control codes for CD players.
Remote control codes for Cable TV devices.
Remote control codes for Satellite receivers.
Remote control codes for DVD players.
Steps to resolve system issues by resetting memory.
Detailed performance specs for audio sections.
FM/AM tuner and video performance specs.
Unit dimensions, power, and weight.
General| Brand | Harman Kardon |
|---|---|
| Model | AVR 4000 |
| Category | Receiver |
| Language | English |
To Next Page