Need help?Do you have a question about the Harman Kardon AVR 435 and is the answer not in the manual?
General| Type | AV Receiver |
|---|---|
| Channels | 7.1 |
| Total Harmonic Distortion | 0.07% |
| Input Sensitivity | 200mV |
| Analog Audio Inputs | 8 |
| Composite Video Inputs | 4 |
| S-Video Inputs | 4 |
| Component Video Inputs | 2 |
| Headphone Output | Yes |
| HDMI | No |
| Surround Sound Formats | Dolby Digital, DTS, Dolby Pro Logic II |
| Tuner | AM/FM |
| Signal to Noise Ratio | 100dB |
| Speaker Impedance | 8 ohms |
| Digital Inputs | Coaxial, Optical |
| Preamp Outputs | 7.1 |
| Dimensions (W x H x D) | 440mm x 165mm x 395mm |
Adjusts bias for front and surround channels on the main board.
Adjusts bias for SBL, Center, and SBR channels on the back surround board.
Shows output signals for various channels like FL, Center, FR.
Details the input path for 2-channel audio signals.
Schematic for 8-channel input and output connections.
Detailed schematic of the DSP chip and its connections.
Schematic for the center channel amplifier circuit.
Schematic for the surround SB channel amplifier circuits.
Schematic of main amplifier channels and protection systems.
To Next Page
