Need help?Do you have a question about the Harman Kardon AVR 430 and is the answer not in the manual?
General| Type | AV Receiver |
|---|---|
| Channels | 7.1 |
| Total Harmonic Distortion (THD) | 0.07% |
| Input Impedance | 47 kΩ |
| Signal-to-Noise Ratio | 100 dB |
| HDMI Inputs | 3 |
| HDMI Outputs | 1 |
| Digital Audio Inputs | 2 Optical, 1 Coaxial |
| Phono Input | Yes |
| USB Port | No |
| Ethernet Port | No |
| Wi-Fi | No |
| Bluetooth | No |
| Supported Audio Formats | Dolby Digital, DTS |
| Input Sensitivity | 200 mV |
Detailed specifications for stereo and surround sound modes, including power output and frequency response.
Procedures for setting bias levels on the main board for front and surround channels.
Procedures for setting bias on the back surround board for SBL, Center, and SBR channels.
Illustrates the wiring and connections between all major circuit boards of the AVR.
Detailed circuit schematic for the front panel control and interface board.
A comprehensive schematic showing the interconnectedness of all major internal boards and their functions.
To Next Page