Need help?Do you have a question about the Harman Kardon AVR 8000 and is the answer not in the manual?
General| Type | AV Receiver |
|---|---|
| Channels | 7.1 |
| Total Harmonic Distortion | 0.07% |
| Signal to noise ratio | 100 dB |
| Input Sensitivity | 200 mV |
| Frequency Response | 20Hz to 20kHz |
| Input Impedance | 47k ohms |
| Digital inputs | coaxial, optical |
| Video inputs | composite, S-Video |
| Video outputs | composite, S-Video, Component |
| Audio outputs | RCA |
| Audio inputs | RCA |
Covers line voltage verification, extension cord use, power cord handling, cabinet opening, and antenna grounding.
Detailed explanation of each button's function on the main remote control.
Guidance on connecting audio and video sources to the receiver.
Details video connections, system integration, and power supply setup.
Guidelines for optimal speaker placement and selection for surround sound.
Steps for initial system setup, using the OSD, and managing configuration memory.
Configuring input sources, digital inputs, and adjusting bass/treble tone controls.
Selecting and configuring various surround sound modes for different sources.
Adjusting speaker delay times for precise surround sound timing.
Setting speaker output levels and configuring the bass peak limiter.
Methods for programming the remote using direct codes or auto-search.
Procedure to reset the unit's memory and microprocessor.
To Next Page
