Harman Kardon AVR20 II User Manual

Handle the Power Cord
Gently.
M To disconnect the plug from the
AC outlet, pull on the plug itself,
not on the cord.
Hi Disconnect the plug from the AC
outlet whenever the unit is to be
left unused for an extended
period of time.
HM Do not place furniture or other.
heavy objects on the cord, and
avoid dropping heavy objects on
it. Also do not make a knot in
the cord.
Piace the unit on a firm
and level surface.
Avoid installing it:
M@ In moist or humid places;
HM Close to heating equipment or in
places exposed to. direct sunlight;
M@ ina direct draft from an air
conditioner or in other very cold
locations;
M@ in places subject to excessive
vibration or dust;
MH In poorly ventilated places.
Moving the Unit.
Before moving the unit, be sure to
unplug the power cord from the AC
outlet and disconnect all wires to
antennas and other components.
Do Not Open the Cabinet.
Do not attempt to service this unit.
Tampering with internal components
can cause fire or shock, and may void
your guarantee. If water or small
objects enter the unit, unplug the
power cord immediately and consult an
authorized Harman Kardon service
center. Using the unit under such
conditions may cause a fire or shock
hazard.
Cleaning.
Remove dust by wiping the unit with a
soft, dry cloth. If necessary, use a soft
cloth lightly dampened with mild soapy
water; then wipe with a dry cloth.
Never use benzene, thinner, alcohol
or other volatile agents, and avoid
spraying insecticides near the unit.
TABLE OF CONTENTS
Front Panel Controls
Rear Panel Connedtions
Optional Multi-room Control Adapter Connection
Surround Sound Effects
Operation
AVR20 II System Remote Control
Trouble Shooting
Specifications
FCC Information
This equipment has been tested and found to comply with the limits for a
Class
B
digital
device,
pursuant
to
Part
15
of
the
FCC
Rules.
These
limits
are
designed
to
provide
reasonable
protection
against
harmful
interference
in
a
residential installation. This equipment generates, uses and can radiate radio
frequeny
energy
and,
if
not
installed
and
used
in
accordance
with
the
instructions,
may
cause
harmful
interference
to
radio
communications.
However,
there
is
no
guarantee
that
interference
will
not
occur
in
a
particular
installation.
If
this
equipment
does
cause
harmful
interference
to
radio
or
television reception, which can be determined by turning the equipment off
and
on,
the
user
is
encouraged
to
try
to
correct
the
interference
by
one
or
more of the following measures:
¢ Reorient or relocate the receiving antenna.
¢ Increase theseparation between the equipment and receiver.
«
Connect
the
equipment
into
an
outlet
on
a
circuit
different
fromt
that
to
which the receiver is connected. 7
¢
Consult
the
dealer
or
an
experienced
radio
TV
technician
for
help.
CAUTION
:
Any
changes
or
modifications
in
construction
of
this
device
which
are
not
expressly
approved
by
the
party
responsible
for
compliance
could
void
the
user's
authority
to
operate
the
equipment.

Harman Kardon AVR20 II Specifications

General

Brand	Harman Kardon
Model	AVR20 II
Category	Receiver
Language	English